Quartzite countertops can cost about $65 to $190 per square foot installed as a broad planning range. Using that range, 40 square feet works out to approximately $2,600 to $7,600. Rare slabs and complex fabrication can cost more. Your selected stone, slab usage and included services determine the actual quote.
Price information reviewed in November 2026. Estimates are in U.S. dollars.
5 Key Takeaways
- Use installed pricing to prepare a budget, then confirm what the quote includes.
- A slab-only price excludes some or all fabrication and installation services.
- Slab yield, seams, cutouts and waterfall panels can change the total substantially.
- Taj Mahal, Cristallo and other named stones need quotes for the actual slabs available.
- Compare the same scope of work before choosing between estimates.
Quartzite appeals to homeowners who want natural variation, visible mineral patterns and a stone surface. Budgeting for it takes more than multiplying the size of the kitchen by a single advertised rate. The finished countertop area, slab dimensions and fabrication plan all matter.
This guide explains how those pieces fit together. The examples are planning calculations, not Badger Granite offers or measured local averages.
Quartzite Countertops Cost Per Square Foot
Installed pricing combines the surface with some or all of the work needed to turn it into a countertop. Ask whether a quoted rate covers templating, fabrication, standard edges, delivery and fitting. Add-on services vary between companies.
| Price type | What it means | What to confirm |
|---|---|---|
| Material or slab price | The stone before some or all fabrication | Full-slab charges, usable area and delivery |
| Fabricated countertop price | Stone cut and finished for a layout | Whether transport, installation and cutouts are included |
| Installed planning range | About $65–$190 per sq. ft. | Exact stone, scope, project minimums and exclusions |
| Premium custom work | Can exceed the planning range | Additional slabs, matching, supports and special handling |
Do not add a separate labor estimate to a rate that already includes installation. Instead, identify which services remain outside the quote and add only those items to your budget.
Project Cost by Countertop Area
Measure the countertop surfaces, not the kitchen floor. For a rough sketch, divide each rectangular section into length and depth, calculate its area, then add the sections without counting corners twice. Leave final measurements to the fabricator.
| Countertop area | At $65 per sq. ft. | At $190 per sq. ft. |
|---|---|---|
| 20 sq. ft. | $1,300 | $3,800 |
| 30 sq. ft. | $1,950 | $5,700 |
| 40 sq. ft. | $2,600 | $7,600 |
| 50 sq. ft. | $3,250 | $9,500 |
| 60 sq. ft. | $3,900 | $11,400 |
| 80 sq. ft. | $5,200 | $15,200 |
These are arithmetic examples, not average prices for particular kitchen sizes. They exclude any work outside the installed rate. Small jobs can have minimum charges, while large islands may require additional material or handling.
How Much Does a 10-Foot Quartzite Countertop Cost?
A straight run measuring 10 feet by 25 inches contains about 20.83 square feet. Multiplying by the planning range produces roughly $1,355 to $3,960. A deeper island has more surface area, even when its length is the same.
Ask about sink cutouts, edges, backsplash and slab requirements before treating that calculation as your budget. The usable area on the slab may not match the area of the finished countertop.
How Much Does a Quartzite Slab Cost?
A full slab quote depends on its dimensions, thickness, finish, appearance and availability. Ask the supplier whether the price is for the entire slab or only the material allocated to your project. There is no single slab size or price that applies to every quartzite.
For illustration, a slab measuring 120 by 70 inches has a gross area of about 58.3 square feet. That does not mean it can produce 58.3 square feet of finished counters. Trimming, cutouts, layout and pattern direction reduce usable yield.
Request a layout showing how your pieces fit on the selected slabs. This is especially useful when a small extra section would trigger another slab purchase. Ask whether any remaining material belongs to you and whether storage or later fabrication carries a charge.
Taj Mahal, Cristallo and Other Quartzite Prices
A stone name helps identify a design family, but it does not provide a fixed national price. Slabs sold under the same name can differ in appearance, dimensions, finish and availability. Compare the actual inventory being offered.
Taj Mahal Quartzite Cost Per Square Foot
To price Taj Mahal, request an installed estimate for the selected slabs and your layout. Ask whether the quote includes the slab quantity, edges, cutouts and seam work. A material-only listing cannot be compared directly with an installed project price.
If you are comparing several Taj Mahal slabs, view them together and identify the ones included in your quote. A small sample may not represent the movement across the full surface.
Cristallo Quartzite Price
Cristallo projects also need slab-specific estimates. If your design includes backlighting, request a separate specification and quote for the lighting, support and access needed for maintenance. Do not assume those features are included in countertop fabrication.
Sea Pearl and Macaubas Selections
For Sea Pearl, White Macaubas or Macaubas Fantasy, ask the same questions about exact slabs and finished scope. A distinctive name alone does not establish a higher or lower installed cost. Local availability and how the pattern fits the layout can change the result.
What Is the Most or Least Expensive Quartzite?
There is no permanent ranking that applies to every supplier. Scarce selections, unusual movement and demanding layouts can raise prices. In-stock slabs or suitable remnants may offer better value, particularly for smaller surfaces. Compare current quotes before choosing a stone solely on a price label.
What Changes Quartzite Installation Costs?
Fabrication and Cutouts
Sink openings, cooktop cutouts, faucet holes and curved sections require machining and finishing. Undermount sink openings have exposed stone edges that must be finished carefully. Ask for each opening to appear in the scope.
Edges and Waterfall Panels
An eased edge and a built-up mitered edge involve different work. Waterfall panels add vertical stone surfaces, joints and often more slab area. Review countertop edge options before comparing bids.
Seams and Pattern Matching
Vein alignment can influence which slabs you need and where the fabricator cuts them. Ask to review seam locations and pattern direction before fabrication. A promise of invisible seams is not a useful substitute for an agreed layout.
Site Preparation and Access
Cabinet leveling, reinforcement, stairs and narrow access can change installation needs. Have the installer assess the site and define any preparation required before final measurement. Confirm who completes that work.
Replacement Work
Replacing existing counters may add demolition, disposal, backsplash repairs and plumbing reconnection. Ask whether the existing sink can be reused and who is responsible for disconnecting and reconnecting it.
Quartzite Versus Quartz and Granite Cost
Quartzite, quartz and granite have overlapping prices. Quartzite can cost more than common granite or standard engineered quartz, but a particular slab and installation may change that order. Compare finished quotes for the same layout.
Quartzite and granite are natural stones. Engineered quartz combines mineral ingredients with binders and pigments. These materials differ in appearance and care, so price should be only one part of the decision.
Use the quartz cost guide and granite cost guide to compare the budgeting process. Then request quotes for the actual surfaces you are considering.
How to Reduce the Project Cost
Ask to compare several available slabs within your budget. You may find that a less costly selection still gives you the natural movement you want. Check larger views rather than choosing only from a small sample.
Keep the layout and edges simple where that suits your design. Consider whether a waterfall or full-height stone backsplash is a priority. Removing a feature you do not value may save more than changing the main countertop surface.
For a vanity or small bar, ask about remnants. Confirm that the piece is large enough, has the right thickness and allows for the required cutouts. A remnant still needs fabrication and installation.
Compare written estimates with matching inclusions. A lower headline rate may not be less expensive after removal, cutouts and delivery are included. Confirm how changes discovered during final templating will be approved.
Maintenance and Material Checks
Ask for the stone’s identification and recommended care in writing. Trade names alone do not tell you everything about a slab’s performance. Confirm whether sealing is recommended for the specific stone, finish and use.
Sealers improve stain resistance but do not make stone stain-proof. Wipe spills promptly, use suitable stone cleaners and follow the supplier’s maintenance guidance. Do not assume every slab needs sealing on the same annual schedule.
Use cutting boards and trivets to protect the surface and its finish. Also ask what the installation warranty covers and how chips, seams or other concerns should be reported.
What to Bring for an Estimate
Bring a rough dimensioned sketch, room photos, sink and cooktop details, and your preferred stone selections. Mark any island overhang, backsplash and waterfall panels. These details make an early estimate more useful.
Before ordering, confirm slab selection, fabrication layout, support requirements, included services, taxes, payment terms and scheduling. Final measurements may change the estimate, so review the final scope before approving the work.
Quartzite Cost Questions
Is quartzite more expensive than granite?
It often costs more than common granite selections, but the ranges overlap. Compare the chosen slabs with the same fabrication and installation requirements.
Is the quoted square-foot price all-inclusive?
Only if the written scope says so. Ask about templating, cutouts, edges, removal, delivery, plumbing and taxes. Different suppliers bundle services differently.
Can I save by buying the slab myself?
Possibly, but confirm fabricator acceptance before purchasing. Clarify transport, breakage responsibility, material suitability and any warranty limits. A low slab price may not reduce the finished project total.
Build Your Budget Around the Actual Stone
Start with a broad installed range, then refine it through slab selection and a measured layout. Badger Granite can help you compare countertop options and prepare an estimate for your Oak Creek or Milwaukee-area project.
